Media Contact: Phil Sasso
Tel: 847-451-2246
Download Hi-Res Photo
Urethane Supply


New Bumper & Cladding Coat™ Adhesion Primer
Sticks To TPO Plastic Without Sanding Or Scuffing
Advanced Solvent-Based Plastic Primer Can Be Topcoated Without Sanding

Rainsville, Alabama - Urethane Supply Company’s new Bumper & Cladding Coat™ Adhesion Primer adheres to TPO plastic without sanding, scuffing or sweating. The advanced solvent-based formula adheres to smooth or textured TPO without flaking or peeling, preparing the surface for most urethane and polyester-based base/clear topcoat systems.

Adhesion Primer is optimized for adhesion to raw, unprimed TPO plastic, the most difficult bumper material in terms of adhesion. And unlike common adhesion “promoters”, there’s no painting “window” – that is, once it’s dry (60 minutes at 75ºF/15 minutes at 130º F) there is no need to rush to topcoat the primed bumper – you can even wait a few days or weeks.

“Adhesion Primer sprays like paint and sticks like glue,” said Urethane Supply Company Sales & Tech Support Manager, Kurt Lammon. “It works best on unprimed TPO bumpers like on Toyota, Kia, Nissan and Subaru. Once the topcoat is cured, you can bore a hole in the plastic with a pressure washer without peeling the topcoat or primer.”

Bumper & Cladding Coat Adhesion Primer is classified as a specialty coating and is fully compliant under both EPA National VOC Emission Standards and California’s SCAQMD Rule 1151.

Urethane Supply Company of Rainsville, Alabama, was founded in 1981. The company is a leader in automotive plastic repair and refinishing since 1981.

For more information on Bumper & Cladding Coat Adhesion Primer, or the name of the distributor near you, contact Urethane Supply Company at 800-633-3047 or visit www.urethanesupply.com.

# # #

© 1999 - Sasso Marketing, Inc. | All rights reserved